Well the foam is DONE!!!!!! Whooohooooooo!!!!!!!!!!!!!!! I finished it up this morning, and it really was not as bad as I thought it would be. It is very messy, but if you get a plan going, you will be good to go. I am now working on the gas tank enclosure and I found floor mats made from recycled tires that will work perfect. I will just cut them into strips and glue them in.
Single 8" strip of 1708 Biax for the tabbing to the hull
I also wrapped the corners in the bilge.
Here is the two apart foam I used for the hull.
I used 2" pour and relief holes to guide the foam where I wanted it to go. Major learning curve. I had it down pat right when I finished.
My daughter called these mushrooms. It is where the foam came through the holes.
What a mess. You will go through a TON of supplies because the foam sticks to everything.
No comments:
Post a Comment